Panasonic FP-X0 L40MR - Page 157

Confirmation of the password settings
Current status
Indicates the current status of the password setting. There are following five statuses.
Item
Settings
Password is not set
Password is not set.
4 digits Protect Four-digit password, and access is prohibited.
4 digits Available to access Four-digit password, and access is allowed.
(The status that inputting the password completes and that can
access programs.)
8 digits Protect Eight-digit password, and access is prohibited.
8 digits Available to access Eight-digit password, and access is allowed.
(The status that inputting the password completes and that can
access programs.)
Available retry counts
- This is the number of times that you can input the password in succession.
- You can input up to three times, and every time incorrect password is input, the number will decrease.
- If you fail to input the correct password for 3 times in succession, you cannot access the program.
- Turn the power supply of the PLC off and then on again to try to input the password again.
Note:
If the power supply of the PLC is turned on/off when the access is permitted, the PLC will be password
protected again.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com