Panasonic FP-X0 L40MR - Page 218

Item
Add-
ress
Name
Default
value
Description
Tool port setting
410
Unit No. setting
1
1 to 99
412
Communication
mode setting
Computer link
Computer link
General-purpose communications
Note2)
Selection of modem
connection
Disabled Enabled/Disabled
413
Communication
format setting
Data length
bit: 8 bits
Parity check:
“with odd”
Stop bit: 1 bit
Enter the settings for the various items.
- Data length bit: 7 bits/8 bits
- Parity check: none/with odd/with even
- Stop bit: 1 bit/2 bits
- The following setting is valid only when
the communication mode specified by
system register 412 has been set to
“General-purpose serial communication”.
- Terminator: CR/CR+LF/None
- Header: STX not exist/STX exist
415 Baud rate setting 9600 bps
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
420
Starting address for
received buffer of
general (serial data)
communication mode
0 0 to 2499
421
Buffer capacity
setting for data
received of general
(serial data)
communication mode
128 0 to 128
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com