Panasonic FP-X0 L40MR - Page 243

(A: Available, N/A: Not available)
Address Name Description
Read-
ing
Writ-
ing
DT90300
Elapsed
value
area
Lower words
HSC-CH0
Counting area for input (X0) or
(X0, X1) of the main unit.
A
A
Note1)
DT90301 Higher words A
A
Note1)
DT90302
Target
value
area
Lower words
The target value is set when
instructions F166 (HC1S) and
F167 (HC1R) are executed.
A
A
Note1)
DT90303 Higher words A
A
Note)
DT90304
Elapsed
value
area
Lower words
HSC-CH1
Counting area for input (X1) of
the main unit.
A
A
Note1)
DT90305 Higher words A
A
Note1)
DT90306
Target
value
area
Lower words
The target value is set when
instructions F166 (HC1S) and
F167 (HC1R) are executed.
A
A
Note1)
DT90307 Higher words A
A
Note1)
DT90308
Elapsed
value
area
Lower words
HSC-CH2
Counting area for input (X2) or
(X2, X3) of the main unit.
A
A
Note1)
DT90309 Higher words A
A
Note1)
DT90310
Target
value
area
Lower words
The target value is set when
instructions F166 (HC1S) and
F167 (HC1R) are executed.
A
A
Note1)
DT90311 Higher words A
A
Note1)
DT90312
Elapsed
value
area
Lower words
HSC-CH3
Counting area for input (X3) of
the main unit.
A
A
Note1)
DT90313 Higher words A
A
Note1)
DT90314
Target
value
area
Lower words
The target value is set when
instructions F166 (HC1S) and
F167 (HC1R) are executed.
A
A
Note1)
DT90315 Higher words A
A
Note1)
DT90316
to
DT90363
Not used
-
N/A N/A
Note1) Writing in the elapsed value area is available by F1 (DMV) instruction only.
Writing in the target value area is available by F166 (HC1S) and F167 (HC1R) instructions only.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com