FP2 Serial Data Unit
Specifications
7 − 8
7.4 Transmission Format
7.4 Transmission Format
Transmission format when the power supply is turned on
The data transmission format of the serial data unit is automatically set to the values
included in the setting contents of the transmission format setting switches (DIP
switches) for both COM.1 and COM.2 when the power supply is turned on.
Item Specifications
Transmission speed 4800/9600/19200bps, (selecting possible using dip switch)
Data length (Character bit) 7 bits/8 bits, (selecting possible using dip switch)
Parity check Valid (odd)
Stop bit length 1 bit
Control signals CS and CD Invalid
End code C
R
(H0D)
Start code Invalid
To Next Page
Loading...
