76
VQT4C38
∫ To disconnect USB cable safely
Select the icon in task tray displayed on the PC, and then click [Eject Panasonic
Camcorder].
≥ Depending on your PC’s settings, this icon may not be displayed.
About the screen indication of the unit
≥ Do not disconnect the USB cable or the battery while the access lamp is on or card
access icon ( ) appears on the unit screen.
≥ If the screen does not change when the unit is operated while connected to a PC,
disconnect the battery, wait approximately 1 minute, reconnect the battery, wait
approximately 1 minute again, and then turn the unit back on. (Data may be destroyed
when above operation is performed while accessing the SD card.)
HC-V10EB_VQT4C38_mst.book 76 ページ ２０１２年１月２４日 火曜日 午前９時３５分
To Next Page
Loading...
