To Next PageTo Next PageWhat to do if Panasonic Camcorder is on but not working?
If your Panasonic Camcorder is on but not responding, try removing the battery or AC adapter, waiting about a minute, and then reconnecting it. If the camcorder still doesn't work, disconnect the power and contact consumer support.
What does “ENVIRONMENT TOO DARK, OR LENS COVER CLOSED” mean on Panasonic HC-V10K Camcorder?
If your Panasonic Camcorder displays the message “ENVIRONMENT TOO DARK, OR LENS COVER CLOSED,” ensure that the lens cover is open before turning on the unit. This message may also appear when recording in very dark environments.
What to do if Panasonic HC-V10K does not recognize SD card?
If your Panasonic Camcorder doesn't recognize the SD card, it might be because the SD card was formatted on a PC. Try formatting the SD card using the camcorder itself.
Why does my Panasonic HC-V10K Camcorder turn off automatically?
If your Panasonic Camcorder turns off automatically, it might be due to the VIERA Link function. This happens when the unit turns off when you turn off the power to the TV using the TV remote control. If you're not using VIERA Link, disable it in the settings by setting [VIERA Link] to [OFF].
How to fix Panasonic HC-V10K Camcorder auto focus?
If the auto focus on your Panasonic Camcorder isn't working, try switching to Intelligent Auto Mode. If you're recording a scene that's difficult to focus on in Auto Focus Mode, switch to Manual Focus Mode and adjust the focus manually.
Why does my Panasonic HC-V10K arbitrarily stop recording?
If your Panasonic Camcorder stops recording unexpectedly, ensure you're using an SD card suitable for motion picture recording. The card's data writing speed might have deteriorated due to repeated use. Try formatting the SD card or the built-in memory using the camcorder. Also, if [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF].
Why does my Panasonic Camcorder battery die so fast?
If your Panasonic Camcorder battery drains quickly, it may simply need a recharge. Ensure the battery is fully charged. Note that in cold environments, battery life is typically shorter. If the battery still doesn't last long after a full charge, it might be worn out and require replacement, as batteries have a limited lifespan.
Why is there no video or audio output from my Panasonic HC-V10K Camcorder to the TV?
If you're not getting video or audio output on your TV from your Panasonic Camcorder, ensure you've selected the correct input channel on your TV. Refer to your TV's operating instructions for assistance. If the images appear squeezed, adjust the [TV ASPECT] setting on the camcorder to match your TV's aspect ratio. Also, adjust the unit's settings based on the type of cable you're using to connect to the TV. Note that no audio will be played on the TV during recording mode, and the unit does not output sound in playback mode when connected to a television.
Why is my Panasonic HC-V10K not detected when connected to PC via USB?
If your Panasonic Camcorder is not detected by your PC when connected via USB, try re-inserting the SD card into the unit and reconnecting the USB cable. You can also try a different USB port on your computer. Check the operating environment. Restarting both the PC and the camcorder before reconnecting the USB cable may also resolve the issue.
What to do if Panasonic HC-V10K Camcorder displays “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
If your Panasonic Camcorder displays the error message “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN,” the unit has detected an error. Try restarting the unit by turning it off and then on again. If the message persists after restarting, the unit may require repair.
General| Type | Camcorder |
|---|---|
| Sensor Type | MOS |
| Image Sensor Size | 1/5.8 inch |
| Screen Size | 2.7 inches |
| Weight | 240 g (including battery) |
| LCD Screen Size | 2.7 inches |
| Video Resolution | 1920 x 1080 |
| Video Format | AVCHD, MP4 |
| HDMI Output | Yes |
| USB Port | Yes |
| Battery Type | Lithium-ion |
| LCD Screen Resolution | 230400 pixels |
| Image Stabilization | Optical |
| Storage Media | SD/SDHC/SDXC |
Critical safety instructions to prevent hazards like fire, shock, or damage.
Important operational cautions to prevent damage or hazards in specific environments.
Specific guidelines and warnings for handling the lithium-ion battery pack.
Instructions for cleaning the camera body and lens to maintain performance.
Procedure for correctly inserting the battery pack into the unit.
Steps for charging the battery using the AC adaptor and USB cable.
Instructions for safely inserting and removing SD memory cards.
Step-by-step guide for safely inserting and removing the battery pack.
How to use operation icons for fast forward, rewind, and slow-motion playback.
Instructions for connecting the camcorder to a PC via USB for data transfer.
Solutions for common problems encountered during operation, recording, and playback.
Information on battery care, storage, and lifespan.
