Why does my Panasonic HC-V180 stop recording by itself?
If your Panasonic Camcorder stops recording unexpectedly, ensure you are using an SD card suitable for motion picture recording. The recordable time may be reduced due to the data writing speed or repeated recording and deletion. Try formatting the SD card using the camcorder. Also, if [AGS] is set to [ON], record in the normal horizontal position or set [AGS] to [OFF].
How to fix the auto focus on my Panasonic HC-V180 Camcorder?
Switch to Intelligent Auto Mode or Intelligent Auto Plus Mode. If you are trying to record a scene which is hard to bring into focus in Auto Focus Mode, use the Manual Focus Mode to adjust the focus.
What to do if Panasonic Camcorder displays 'Error occurred' message?
If your Panasonic Camcorder displays the message “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN,” it means the unit has detected an error. Try restarting the unit by turning it off and then on again. If the error persists after restarting, it indicates a need for repair. Disconnect the power and consult the dealer from whom you purchased the unit. Do not attempt to repair the unit yourself.
Why can't I see the PDF operating instructions for HD Writer LE 3.0?
You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to read the PDF operating instructions for HD Writer LE 3.0.
What to do if I get an error message when disconnecting the USB cable from my Panasonic Camcorder?
To safely disconnect the USB cable, select the icon in the task tray displayed on the PC, and then select the model number of this unit to disconnect the USB cable.
Why does my Panasonic Camcorder image have color changes or horizontal bars?
If you notice color or brightness changes or horizontal bars in the image of your Panasonic Camcorder, or if the LCD monitor flickers indoors, it's likely due to recording under fluorescent, mercury, or sodium light. This isn't a malfunction. When recording motion pictures, use Intelligent Auto Mode/Intelligent Auto Plus Mode, or set the shutter speed to 1/60 in areas with 60 Hz power, or 1/100 in areas with 50 Hz power. This issue will not affect recorded images in Still Picture Recording Mode.
How to fix a Panasonic Camcorder that won't turn on or has short battery life?
If your Panasonic Camcorder won't turn on, stay on, or the battery drains quickly, first, ensure the battery is fully charged by charging it again. Keep in mind that battery life decreases in cold environments. Also, batteries have a limited lifespan. If the operating time remains short after a full charge, the battery is likely worn out and needs replacing.
Why is my Panasonic Camcorder not detected by my PC?
Try these steps: 1. Re-insert the SD card into the unit, then reconnect the supplied USB cable. 2. Select another USB terminal on the PC. 3. Check the operating environment. 4. Restart the PC and turn on the unit again before reconnecting the USB cable.
What to do if my Panasonic Camcorder displays 'ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.'?
This message indicates that the unit has automatically detected an error. Try restarting your Panasonic Camcorder by turning it off and then on again. If the error message continues to appear after restarting, the unit may need repair. In this case, detach the power and consult the dealer from whom you purchased the unit. Do not attempt to repair the camcorder yourself.
What to do if Panasonic Camcorder is not detected by PC via USB?
If your Panasonic Camcorder isn't being detected by your PC when connected via USB, re-insert the SD card into the camcorder and reconnect the supplied USB cable. Try a different USB terminal on your PC. Verify the operating environment. After restarting the PC and turning on the camcorder again, reconnect the USB cable.
General| Sensor type | MOS BSI |
|---|---|
| Total megapixels | 2.51 MP |
| Optical sensor size | 1/5.8 \ |
| Effective megapixels (image) | 2.2 MP |
| Digital zoom | 500 x |
| Optical zoom | 50 x |
| Image stabilizer | Yes |
| Focal length range | 2.06 - 103 mm |
| Image stabilizer type | Hybrid Image Stabilization (HIS) |
| Maximum aperture number | 4.2 |
| Minimum aperture number | 1.8 |
| Focal length (35mm film equivalent) | 28 - 1740 mm |
| 3D | - |
| Camcorder type | Handheld camcorder |
| Minimum illumination | 1 lx |
| Supported aspect ratios | 3:2, 4:3, 16:9 |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), ENG, HIN, PER, THA |
| Focus adjustment | Auto/Manual |
| Shutter speed (photo) | 1/2 - 1/2000 s |
| Camcorder media type | Memory card |
| Disc types supported | No |
| Compatible memory cards | SD, SDHC, SDXC |
| Internal storage capacity | - GB |
| Video resolutions | 960 x 540, 1280 x 720, 1920 x 1080 pixels |
| Supported video modes | 720p, 1080i, 1080p |
| Video formats supported | AVCHD, H.264, MP4, MPEG4 |
| Maximum video resolution | 1920 x 1080 pixels |
| Charging source | AC, Battery |
| Battery capacity | 1940 mAh |
| Battery life (max) | - h |
| Video recording time | 1.25 h |
| Audio system | Dolby Digital 2.0 |
| Image formats supported | JPEG |
| Maximum image resolution | 4224 x 2376 pixels |
| Still image resolution(s) | 4224 x 2376, 1920 x 1080, 3408 x 2272, 1728 x 1152, 3136 x 2352, 640 x 480 |
| Display diagonal | 2.7 \ |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Mini HDMI ports quantity | 1 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Cables included | Mini-HDMI, USB |
| Product color | Black |
Weight and Dimensions| Depth | 116 mm |
|---|---|
| Width | 53 mm |
| Height | 59 mm |
| Weight | 211 g |
Identifies camera parts, power supply, and battery charging.
Covers SD card operations, recording modes, and touch screen use.
Step-by-step guides for recording motion and still pictures.
How to play back content and navigate menus/settings.
Explains zoom operations and image stabilizer functions.
Covers various recording modes and manual adjustments.
To Next Page
