20
SQT1126 (ENG)
≥ Open the lens cover before turning on the unit.
1 Open the LCD monitor, and set this
unit to Motion Picture Recording
Mode. (l 16)
2 Press the recording start/stop
button to start recording.
3 Press the recording start/stop
button again to pause recording.
≥ Recording can also be started/stopped by touching the recording button icon.
≥ Open the lens cover before turning on the unit.
1 Open the LCD monitor, and set this unit
to Still Picture Recording Mode. (l 16)
2 Press the button halfway. (For
Auto Focus only)
3 Press the button fully.
Basic
Recording motion pictures
Basic
Recording still pictures
A When you begin recording, ; changes
to ¥.
B Recording button icon
T
W
HC-V180PP-SQT1126_mst.book 20 ページ 2015年10月30日 金曜日 午後1時31分