27
(ENG) SQT0665
Preparations before using [Link to Cell]
Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-
compatible), or iOS device.
≥ If the smartphone is NFC-compatible, the NFC mark is displayed when you start up “Image App”.
Using NFC, you can easily set up a direct connection between this unit and the smartphone.
∫ If the device is Android (NFC-compatible)
Use NFC to set up a direct connection between this unit and the smartphone.
(l 28)
∫ If the device is Android (non-NFC-compatible) or iOS
Scan a QR code to set up a direct connection between this unit and the
smartphone. (l 28)
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Set up a Wi-Fi connection between this unit and the wireless access point.
≥ [WPS Connection] (l 29)
≥ Searching for wireless access points to set up a connection (l 30)
If your wireless access point is compatible with WPS, proceed to [WPS Connection] (l 29)
Setting up a direct Wi-Fi connection between this unit and a
smartphone
Setting up a Wi-Fi connection via a wireless access point
HC-V270PP-SQT0665_mst.book 27 ページ ２０１４年１１月４日 火曜日 午前１１時４２分
To Next Page
Loading...
