- 115 -
∫ If the device is Android (non-NFC-compatible) or iOS
Operate this unit and the smartphone to set up a direct connection.
≥ [Easy Connection (WPS)] (l 148)
≥ Connecting with QR code (l 149)
≥ Connecting by entering an SSID and Password (l 149)
When the Wi-Fi connection is complete, proceed to “Using [Remote Ctrl] with a direct connection”.
(l 116)
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Set up a Wi-Fi connection between this unit and the wireless access point.
≥ [Easy Connection (WPS)] (l 145)
≥ Searching for wireless access points to set up a connection (l 146)
≥ Setting up a connection manually (l 147)
When the Wi-Fi connection is complete, proceed to “Using [Remote Ctrl] with a wireless access
point connection”. (l 117)
≥ Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (l 143)
Setting up a Wi-Fi connection via a wireless access point
To Next Page
Loading...
