Panasonic HC-V270 - Setting up a Direct Connection to a Smartphone

- 148 -
≥ Check the wireless access points instruction manual and settings when a saving wireless access
point.
≥ The Encryption methods are [AES], [TKIP] and [WEP] in descending order of strength. We
recommend you connect with the strongest possible Encryption method.
≥ When the signal of the wireless access point is weak, a connection may not be established. Refer
to “Messages” (l 174) and “Troubleshooting” (l 176) for details.
≥ Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
Setting up a direct connection to a smartphone
Check if the smartphone you are using is compatible with WPS
j If the smartphone is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j If the smartphone is not compatible with WPS:
Proceed to the “Connecting with QR code” (l 149)
1 Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2 Touch [Direct Connection].
3 Touch [Change connection type].
4 Touch [Easy Connection (WPS)].
5 Set the smartphone to WPS Mode.
[Easy Connection (WPS)]
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen