- 64 -
Switch the picture quality and recording format of the motion pictures to record. The recording
formats that can be set change according to [REC FORMAT] setting.
≥ When [REC FORMAT] is set to [AVCHD]
A Favours image quality
B Favours Recording time
≥ When [REC FORMAT] is set to [MP4/iFrame]
*1 This option allows you to record in 1080/50p (1920k1080/50 progressive), which is the highest
picture quality for this unit.
*2 [1080] and [720] are recording modes suitable for playing back or editing on a PC.
*3 [iFrame] is a format suitable for Mac (iMovie etc.). It is recommended for when using a Mac.
≥ Recordable time using the battery (l 12)
≥ This function’s default setting is [HG] mode.
≥ Please refer to page 187 for details about approximate recordable time.
≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded,
mosaic-type noise may appear at playback.
Detected faces appear with frames.
≥ Up to 5 frames are indicated. Larger faces and faces nearer to the centre of the screen take
preference over others.
[REC MODE]
: [RECORD SETUP] # [REC MODE] # desired setting
[PH]/[HA]/[HG]/[HE]:
(AB)
Set the recording format to 1080/50i.
[1080/50p]
*1
: Set the recording format to 1080/50p.
[1080]
*2
: Set the recording format to 1080/50p.
[720]
*2
: Set the recording format to 720/25p.
[iFrame]
*3
: Set the recording format to iFrame.
[FACE FRAMING]
: [RECORD SETUP] # [FACE FRAMING] # desired setting
[PRIMARY]:
Only the prioritised face framing is displayed.
[ALL]:
All face detection framings are displayed.
[OFF]:
Cancel the setting.
MENU
To Next Page
Loading...
