To Next PageTo Next Page
Need help?Do you have a question about the Panasonic HC-V380PP and is the answer not in the manual?
Important safety notice regarding component handling and electrical safety.
Procedure for performing a cold check of leakage current.
Procedure for performing a hot check of leakage current.
Handling sensitive components to prevent damage from electrostatic discharge.
Information and instructions for recycling lithium-ion batteries.
Step-by-step instructions for safely replacing the lithium battery.
Purpose and scope of the service manual for technicians.
Information on lead-free solder composition and handling.
Methods to identify specific model variants based on suffixes.
Procedure for baking ICs and PCBs to improve repair success.
Change the model and destination settings of the unit.
Display main camera system error codes for troubleshooting.
Diagnose device function and interface results on power-on.
Perform field service adjustments and settings.
Restore adjustment data from an SD card.
Calibrate the touch panel positions for accurate input.
List of specialized tools required for servicing the unit.
Important note regarding adjustments after main PCB replacement.
Recommended service position and extension cable connections.
A flow chart outlining the unit's disassembly process.
Diagram showing the physical location of all Printed Circuit Boards.
Detailed, step-by-step instructions for disassembling the unit.
Procedures and necessary jigs for performing electric adjustments.
Details on setting up and using the light box for adjustments.
Lists adjustable items and corresponding components for servicing.
Step-by-step guide for executing various adjustment procedures.
Instructions on how to activate the factory settings mode.
Description of settings that are reset during factory settings.
An overview of the camera's system architecture and components.
A detailed circuit diagram of the camera and system.
Block diagram illustrating video/audio signal processing pathways.
Further details on video/audio signal processing circuitry.
Block diagram showing the circuitry for the lens drive system.
Block diagram detailing the camera's power supply system.
Diagram showing how internal units and PCBs are interconnected.
General