To Next Page
R
russorussellSep 9, 2025
How to fix Panasonic Camcorder not recognised SD card?
- SSean NicholsSep 9, 2025
If the SD card is formatted on a PC, it may not be recognised by this unit. Use this unit to format SD cards.
How to fix Panasonic Camcorder not recognised SD card?
If the SD card is formatted on a PC, it may not be recognised by this unit. Use this unit to format SD cards.
Why is my Panasonic HC-V385 not recognised when inserted in another device?
Ensure that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card/SDXC Memory Card) you inserted. Refer to the operating instructions of the device for details.
What to do if Panasonic Camcorder images or sounds are not outputted to TV?
Select the appropriate channel on your TV that matches the input used for the connection, referring to your TV's operating instructions. Adjust the [TV ASPECT] setting to match the TV's aspect ratio. Note that audio during playback mode is not output from the unit when connected to a TV, and sound levels should be adjusted on the TV itself.
What to do if my Panasonic HC-V385 cannot be operated even when turned on?
Remove the battery or AC adaptor, wait about 1 minute, and then reconnect it. After waiting another minute, turn the unit on again. If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from.
Why does remaining battery indication of Panasonic Camcorder not displayed properly?
The remaining battery capacity indication is an approximation. If it is not displayed correctly, fully charge the battery, discharge it, and then charge it again.
What to do if Panasonic Camcorder is not detected by other devices via USB cable?
When connecting to other devices using only the battery, reconnect using the AC adaptor.
Why I cannot playback scenes/still pictures on my Panasonic HC-V385 Camcorder?
Any scenes/still pictures where the thumbnails are displayed as cannot be played back.
How to fix Panasonic HC-V385 Camcorder not outputting images or sounds via HDMI mini cable?
Verify that the HDMI mini cable is correctly and fully inserted.
How to fix Panasonic HC-V385 image colours or brightness changing?
Changes in colour or brightness, or horizontal bars, can appear when recording under fluorescent, mercury, or sodium light. In Motion Picture Recording Mode, record in Intelligent Auto Mode/Intelligent Auto Plus Mode or set the shutter speed to 1/100 in areas where the power supply frequency is 50 Hz, or 1/125 in areas of 60 Hz. Note that this will not affect recorded images in Still Picture Recording Mode.
What to do if Panasonic HC-V385 Camcorder arbitrarily stops recording?
Make sure to use an SD card suitable for motion picture recording. The recordable time may be shortened due to the deterioration of the data writing speed or repeated recording and deletion. Format the SD card or built-in memory using the unit. If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF].
General| Camera Type | Camcorder |
|---|---|
| Sensor Type | MOS |
| Effective Pixels | 2.51 MP |
| Optical Zoom | 50x |
| Video Resolution | 1920 x 1080 |
| Maximum Video Resolution | 1920 x 1080 |
| Display | LCD |
| LCD Screen Resolution | 460, 800 dots |
| Focus System | Auto / Manual |
| Recording Media | SD/SDHC/SDXC |
| Video Format | AVCHD, MP4 |
| Battery Type | Lithium-ion |
| Touch Panel | Yes |
| Built-in Wi-Fi | Yes |
| Digital Zoom | 1500x |
| LCD Screen Size | 3.0 inch |
| Microphone | Stereo |
| USB | USB 2.0 |
| HDMI | Yes |
| Sensor Size | 1/5.8 inch |
| Image Stabilization | HYBRID O.I.S. + with Active Mode, O.I.S. Lock |
Identifies and describes the main physical components of the camera.
Details on battery types, insertion, charging, and charging times.
Instructions on how to power the camcorder on and off.
How to switch between Recording and Playback modes and Motion/Still Picture modes.
Explains touch screen gestures like touch, slide, and operation icons.
Minimizes gradation loss in bright/dark areas with high contrast.
Records two images simultaneously using Main and Sub Cameras.
Explains how to switch between different recording modes like Intelligent Auto, Manual, etc.
Covers manual focus, white balance, shutter speed, and iris adjustment.
Instructions for setting up remote control via smartphone using [Remote Ctrl].
Steps for connecting the unit to a wireless access point or smartphone.
Procedures for connecting smartphones for Wireless Twin/Multi-Camera functions.
Provides solutions for problems related to power, recording, playback, and connectivity.
