Panasonic HC-V800 - User Manual

Other manuals for Panasonic HC-V800

Basic Owner's Manual52 pages

Basic Operating Instructions44 pages

Questions and Answers

A
Angela BuckleySep 4, 2025
Why does my Panasonic Camcorder battery run down so quickly?
- S
  Sean LivingstonSep 4, 2025
  If your Panasonic Camcorder battery is running down quickly, try these steps: First, fully charge the battery, keeping in mind that cold environments can shorten battery life. If the operating time remains short after a full charge, the battery may be worn out and require replacement. If charging doesn't solve the issue, remove the battery or AC adapter, wait about a minute, reconnect, and then turn the unit on again. If the issue persists, disconnect the power and consult the dealer from whom you purchased the unit.
K
Kimberly WatkinsSep 18, 2025
Why does the color or brightness change on my Panasonic Camcorder, or why do I see horizontal bars?
- D
  Donald MorenoSep 18, 2025
  Changes in color or brightness, horizontal bars, or LCD flickering can occur due to shutter speed settings. In Motion Picture Recording Mode, use Intelligent Auto Mode/Intelligent Auto Plus Mode, or adjust the shutter speed. When [REC FORMAT] is set to [24p]: Set to 1/50 seconds (50 Hz power areas) or 1/60 seconds (60 Hz power areas). For other [REC FORMAT] settings: Set to 1/100 seconds (50 Hz) or 1/60 seconds (60 Hz). Setting the shutter speed to 1/120 seconds reduces the intensity of the problem in FULL HD Slow Motion Mode and Slow & Quick Video Mode. Note that these settings do not affect Still Picture Recording Mode.
L
Linda TapiaSep 16, 2025
What to do if my Panasonic HC-V800 Camcorder cannot be operated even when it is turned on?
- C
  Christopher HoganSep 16, 2025
  If your Panasonic camcorder is on but not operating correctly, try removing the battery or AC adapter, wait about a minute, and then reconnect it. Wait another minute before turning the unit on again. If this doesn't restore normal operation, detach the power connected, and consult the dealer who you purchased this unit from.
C
Catherine RodriguezSep 14, 2025
What to do if Panasonic HC-V800 Camcorder displays “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
- J
  Jillian OconnorSep 14, 2025
  This message indicates that the unit has automatically detected an error. You should restart the unit by turning it off and then on again. If the error message continues to appear even after restarting, repair is needed. In that case, detach the power and consult the dealer from whom you purchased the unit. Do not attempt to repair the unit by yourself.
A
Anthony WilsonSep 12, 2025
How to use Remote Ctrl on my Panasonic HC-V800 Camcorder with a smartphone?
- S
  Sandra MurphySep 12, 2025
  To operate your Panasonic Camcorder from a smartphone using [Remote Ctrl], install the smartphone app “Image App” on your smartphone.
E
Eric PageSep 12, 2025
Why is the color off when recording with my Panasonic Camcorder indoors?
- J
  Juan HutchinsonSep 12, 2025
  If the color balance of images appears strange when recording with your Panasonic Camcorder in places like a gymnasium, set the White Balance setting to (Indoor mode 2). If you still cannot record clearly, set it to (Manual adjustment mode).
R
reneeperezSep 9, 2025
How to fix the auto focus on my Panasonic Camcorder?
- D
  david88Sep 9, 2025
  If the Auto Focus function on your Panasonic Camcorder is not working, switch to Intelligent Auto Mode or Intelligent Auto Plus Mode. If you are trying to record a scene that is difficult to focus on in Auto Focus Mode, switch to Manual Focus Mode and adjust the focus manually.
K
Kathy MeyerSep 7, 2025
Why does my Panasonic HC-V800 Camcorder keep stopping recording?
- E
  eric20Sep 7, 2025
  If your Panasonic Camcorder is arbitrarily stopping recording, ensure you are using an SD card suitable for motion picture recording. If the data writing speed has deteriorated, or after repeated recording and deletion, format the SD card or the built-in memory using the unit. Also, if [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF].
J
Joshua MaySep 5, 2025
Why is the battery indicator wrong on my Panasonic HC-V800?
- H
  Harold CastilloSep 5, 2025
  If the remaining battery indication on your Panasonic Camcorder is not displaying correctly, fully charge the battery, discharge it completely, and then charge it again. Keep in mind that the remaining battery capacity indication is only an approximation.
D
Denise ColeAug 20, 2025
How to fix a Panasonic HC-V800 that won't operate?
- C
  Chelsea WoodsAug 21, 2025
  If your Panasonic Camcorder is not operating correctly or is unresponsive even when turned on, try removing the battery or AC adapter, waiting about a minute, and then reconnecting it. Wait another minute before turning the unit on again. If the problem persists, disconnect the power and consult the dealer from whom you purchased the camcorder.

Panasonic HC-V800 Specifications

General

Lens	Leica Dicomar Lens
Digital Zoom	1500x
LCD Screen Resolution	460, 800 dots
Focus System	Auto / Manual
Recording Media	SD/SDHC/SDXC Memory Card
Sensor Type	1/2.5-type BSI MOS Sensor
Aperture	F1.8 - F4.0
Image Stabilization	HYBRID O.I.S. +
LCD Screen Size	3.0 inches
Recording Format	MP4
Audio Format	AAC (2ch)
Built-in Microphone	Stereo
HDMI Output	Yes
USB Port	Yes
Dimensions	142 mm