- 152 -
Dividing a scene (AVCHD/Backup for Twin Camera)
It is possible to divide an AVCHD scene or a scene recorded as Backup for Twin Camera.
Any unwanted parts in the scene can be deleted after dividing.
≥ Touch [AVCHD] in the motion picture/still picture tab (l 38)
1 Select the menu.
2 Touch and play back the scene you want to divide.
≥ It is convenient to use Slow-motion Playback and Frame-by-frame Playback. (l 120)
3 Touch to set the dividing point.
≥ Touch [YES].
≥ Touch [YES] to continue dividing the same scene. To continue
dividing other scenes, touch [NO] and repeat Steps 2-3.
4 Touch [Return] to complete dividing.
≥ Unwanted parts can be deleted. (l 149)
To delete all the divided points
≥ The scenes that were deleted after division cannot be recovered.
≥ You cannot divide a scene if the number of scenes of a given date would exceed 99 scenes.
≥ It may not be possible to divide scenes with a short recording time.
≥ Data that has been recorded or edited on another device cannot be divided and the divided points
cannot be deleted.
: [EDIT SCENE] # [DIVIDE] # [SET]
: [EDIT SCENE] # [DIVIDE] # [CANCEL ALL]
MENU
MENU
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 152 ページ ２０１８年２月２２日 木曜日 午後１２時３０分
To Next Page
Loading...
