Panasonic HC-VX11 - Setting Date and Time; Setting Your Home Region for the First Time

22
DVQX1456 (ENG)
The clock is not set at the time of purchase. Make sure to set the clock.
≥ When you turn on this unit, the message “Set home region and date/time.” may be
displayed. Select [YES], and follow the steps below to make these settings:
j Step 2 of “Setting your home region for the first time”
j Steps 2–3 of “Setting date and time”
1 Select the menu. (l 29)
2 Touch the date or time to be set, then set the desired value using /.
A Displaying the World Time setting:
[HOME]/ [DESTINATION]
≥ The year can be set between 2000 and 2039.
3 Touch [ENTER].
≥ Touch [EXIT] to complete the setting.
You can set your home region in [SET WORLD TIME].
1 Select the menu. (l 29)
≥ A message will be displayed. Touch [ENTER].
≥ For information on how to change your home region or set the region of your travel destination,
refer to the Operating Instructions (PDF format).
Preparation
Setting date and time
: [SETUP] # [CLOCK SET]
Preparation
Setting your home region for the first
time
: [SETUP] # [SET WORLD TIME]
2 Touch / to select your home
region and touch [ENTER].
≥ When the clock is not set, the current time is
displayed as “--:--”.
A The current time
B The time difference from GMT
(Greenwich Mean Time)
MENU
MENU


HC-WXF1-VXF1-VX1-V800GCGWGN-DVQX1456_eng.book 22 ページ ２０１８年２月５日 月曜日 午後２時３０分