To Next PageTo Next PageWhat to do if my Panasonic HC-VX870 Camcorder is not detected by other devices when connected by the USB cable?
If your Panasonic Camcorder is not being detected by other devices when connected via USB cable, and you are only using the battery, try reconnecting it using the AC adapter.
Why are images or sounds not output even when my Panasonic HC-VX870 Camcorder is connected to the TV by the HDMI micro cable?
If you're not getting images or sounds when your Panasonic Camcorder is connected to the TV via HDMI, ensure the HDMI micro cable is correctly and fully inserted.
Why is the color balance strange when recording in a gymnasium with my Panasonic HC-VX870?
If you encounter strange color balance when recording with your Panasonic Camcorder in places like a gymnasium, set the White Balance setting to (Indoor mode 2). If clarity is still an issue, switch to (Manual adjustment mode).
What to do if my Panasonic Camcorder displays the error message “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
This message indicates that the Panasonic Camcorder has detected an error. Try restarting the unit by turning it off and then on again. If the error message continues to appear after restarting, the device likely requires repair. Detach the power and consult the dealer from whom you purchased the unit. Do not attempt to repair it yourself.
What to do if my Panasonic HC-VX870 Camcorder images or sounds are not output even when connected to the TV by the HDMI micro cable?
If images or sounds are not output when connected to the TV via HDMI micro cable, check if the HDMI micro cable is correctly connected. Ensure the HDMI micro cable is fully inserted.
What to do if my Panasonic HC-VX870 Camcorder displays 'ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN'?
This message on your Panasonic Camcorder indicates that the unit has detected an error. Try restarting the unit by turning it off and then on again. If the error persists after restarting, it may require repair. Contact the dealer from whom you purchased the unit, and do not attempt to repair it yourself.
What to do if my Panasonic Camcorder images or sounds are not output even when correctly connected to a TV?
If images or sounds are not output when your Panasonic Camcorder is connected to a TV, consult your TV's operating instructions to select the correct channel that matches the input used for the connection. Also, adjust the [TV ASPECT] setting to match the aspect ratio of your TV. Note that during playback mode, audio is not output from the camcorder, so adjust the sound on the TV itself.
What to do if my Panasonic Camcorder is not detected by the PC when connected by the USB cable?
If your Panasonic Camcorder is not detected by the PC, try the following steps: * Re-insert the SD card into the unit, then reconnect the supplied USB cable. * Try a different USB terminal on your PC. * Ensure that your operating environment is supported. * Restart your PC and the camcorder, then reconnect the USB cable.
Why are images or sounds not output when my Panasonic Camcorder is connected to a TV?
If the images or sounds are not output even when your Panasonic Camcorder is correctly connected to a TV, or if the images appear squeezed horizontally: * Consult your TV's operating instructions to select the channel that corresponds to the input used for the connection. * Adjust the [TV ASPECT] setting to match the aspect ratio of your TV. * Note that during playback mode, audio is not output from the camcorder itself; adjust the sound on the TV.
Why is my Panasonic Camcorder not detected by the PC when connected via USB?
If your Panasonic Camcorder is not detected by your PC when connected via USB cable: * Re-insert the SD card into the unit, then reconnect the supplied USB cable. * Try a different USB terminal on your PC. * Check the operating environment. After restarting the PC and the camcorder, reconnect the USB cable.
General| Sensor type | MOS BSI |
|---|---|
| Total megapixels | 18.91 MP |
| Optical sensor size | 1/2.3 \ |
| Effective megapixels (image) | 7.00 MP |
| Effective megapixels (movie) | 8.29 MP |
| Filter size | 49 mm |
| Digital zoom | 60 x |
| Optical zoom | 20 x |
| Image stabilizer | Yes |
| Focal length range | 4.08 - 81.6 mm |
| Interchangeable lens | - |
| Image stabilizer type | Hybrid Image Stabilization (HIS) |
| Focal length (35mm film equivalent) | 30.8 - 626 mm |
| Memory slots | 1 |
| Camcorder media type | Memory card |
| Disc types supported | No |
| Compatible memory cards | SD, SDHC, SDXC |
| Internal storage capacity | - GB |
| Focus adjustment | Auto/Manual |
| Camera shutter speed | 0.000125 - 0.04 s |
| Display diagonal | 3 \ |
| Display resolution (numeric) | 460800 pixels |
| Camcorder type | Handheld camcorder |
| Minimum illumination | 2 lx |
| Product color | Black |
| Video formats supported | AVC, AVCHD, H.264, MP4, MPEG4 |
| Maximum video resolution | 1920 x 1080 pixels |
| Maximum image resolution | - pixels |
| Still image resolution(s) | [16:9] 25.9MP (6784 x 3816), 14 MP (4992 x 2808), 2.1 MP (1920 x 1080)/[3:2] 20 MP (5472 x 3648), 10.6 MP (3984 x 2656）, 2.0 MP (1728 x 1152)/[4:3] 20.4 MP (5216 x 3912), 10.9 MP (3808 x 2856), 0.3 MP (640 x 480) |
| Audio system | Dolby Digital 2.0/5.1 |
| Audio formats supported | AAC |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Battery voltage | 3.6 V |
| Battery capacity | 1940 mAh |
| Battery life (max) | - h |
Weight and Dimensions| Depth | 139 mm |
|---|---|
| Width | 65 mm |
| Height | 73 mm |
| Weight | 353 g |
