10 Factory Setting
10.1 How To Turn On The Factory Settings?
1. While the power is turned OFF, keep pressing the “Power” button, “Zoom Lever” to W side and
“Recording/Playback” button for more than 3 seconds until the top screen of the Service Mode Menu being
displayed.
2. Touch the [ 1 ] of LCD.
3. Touch the [ YES ] of LCD.
4. After few seconds “END” is displayed or “ESD NODATA” as “NG” is displayed on LCD monitor. Cutting of
battery connection or AC power supply connection as a completion of the “FACTORY SETTINGS”.
(After recording at least once, even if the physical format of the build-in memory will be performed, “ESD
NODATA” as “NG” is indicated, but “FACTORY SETTINGS” is completed.)
10.2 What Is The Factory Settings?
The factory settings clean up and/or refresh the following settings.
1. Setting Values of menu.
2. Clear the time and date setting.
3. Initialize the Wi-Fi data settings. (except HC-V760)
4. Initialize the NFC data settings. (except HC-V760)
5. Confirm that the built-in memory capacity is correct. (HC-WX970M/VX870M/V770M only)
(Checking of the built-in memory mounting error.)
6. Confirm that the data area of built-in memory is cleared. (HC-WX970M/VX870M/V770M only)
7. Close the lens cover
To Next Page
Loading...
