To Next PageTo Next PageWhat to do if the colour balance of images is strange when recording with my Panasonic HC-VX878 in a place such as a gymnasium?
If the color balance of images appears strange when recording in places like a gymnasium, which have multiple light sources, adjust the White Balance setting to (Indoor mode 2). If the image is still not clear, switch to (Manual adjustment mode).
Why does my Panasonic Camcorder turn off automatically?
If your Panasonic Camcorder turns off when you turn off the TV using the TV remote control, the VIERA Link function is enabled. If you are not using VIERA Link, disable it by setting [VIERA Link] to [OFF].
What to do if my Panasonic HC-VX878 Camcorder displays the error message “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
This message indicates that the Panasonic Camcorder has detected an error. Try restarting the unit by turning it off and then on again. If the error message continues to appear after restarting, the device likely requires repair. Detach the power and consult the dealer from whom you purchased the unit. Do not attempt to repair it yourself.
What to do if my Panasonic HC-VX878 is not detected by the PC when connected by the USB cable?
If your Panasonic Camcorder is not detected by the PC, try the following steps: * Re-insert the SD card into the unit, then reconnect the supplied USB cable. * Try a different USB terminal on your PC. * Ensure that your operating environment is supported. * Restart your PC and the camcorder, then reconnect the USB cable.
What to do if my Panasonic Camcorder won't operate even when turned on?
If your Panasonic Camcorder is on but not operating, remove the battery or AC adapter, wait about a minute, and reconnect it. Wait another minute, then turn the unit on again. Note that doing this while the media is being accessed may damage the data on the media. If normal operation isn't restored, detach the power connected, and consult the dealer who you purchased this unit from.
What to do if my Panasonic HC-VX878 Camcorder displays 'ERROR OCCURRED'?
If your Panasonic Camcorder displays the error message, it has detected an error. Restart the unit by turning it off, and then on again. If the unit is not turned off and on, it will be turned off in about 1 minute. If the error persists after restarting, repair is needed. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the unit by yourself.
Why does my Panasonic HC-VX878 battery run down quickly?
If your Panasonic Camcorder battery drains fast, ensure it is fully charged. In cold environments, battery life decreases. Batteries have a limited lifespan; if the operating time remains short after a full charge, the battery is likely worn and requires replacement.
Why is my Panasonic Camcorder not detected when connected via USB?
If your Panasonic Camcorder isn't detecting the connected device via USB cable, and you're using only battery power, try reconnecting with the AC adapter plugged in.
Why is the battery indicator inaccurate on my Panasonic HC-VX878?
If the remaining battery indication on your Panasonic Camcorder isn't displaying correctly, it's because the indication is an approximation. To recalibrate, fully charge the battery, then fully discharge it, and then charge it again.
What to do if my Panasonic HC-VX878 won't operate or is not working correctly?
If your Panasonic Camcorder isn't operating even when turned on, or isn't working normally, remove the battery or AC adapter, wait about a minute, then reconnect it. Wait another minute before turning the unit back on. If this doesn't restore normal operation, detach the power connected, and consult the dealer who you purchased this unit from.
General