29
(ENG) SQT1160
Preparations before using [Remote Ctrl]
Install the “Image App”. (l 28)
Setting up a direct connection between this unit and the smartphone when
[Direct Connection Password] is set to [OFF] (l 30)
≥ The default setting for [Direct Connection Password] is [OFF].
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Set up a Wi-Fi connection between this unit and the wireless access point.
≥ For information on how to connect this unit and a wireless access point, refer to the Operating
Instructions (PDF format).
Setting up a direct Wi-Fi connection between this unit and a
smartphone
Setting up a Wi-Fi connection via a wireless access point
Image App
Simplified-HC-WXF990&VXF990&VX980_GC&GW&GN&GH-SQT1160_mst.book 29 ページ ２０１６年１月１４日 木曜日 午後３時２
To Next Page
Loading...
