Panasonic HC-VX980M - Using [Remote Ctrl] with a Direct Connection

- 164 -
Using [Remote Ctrl] with a direct connection
5 When the Wi-Fi connection is complete, press the home button on the
smartphone and start up the smartphone application “Image App”.
When [Direct Connection Password] is set to [OFF]
1 Press Wi-Fi button on this unit and touch [Wi-Fi
Setup].
2 Touch [Direct Connection].
≥ This unit will go into connection standby with the smartphone.
≥ The SSID of this unit is displayed on the screen of this unit.
3 Turn on the Wi-Fi function in the smartphone’s
setup menu.
4 On the smartphone’s Wi-Fi setting screen, select
the SSID displayed on this unit.
≥ It may take time to complete the Wi-Fi connection.
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen
6 (If this is the first time the smartphone is connecting
to this unit)
Confirm the message “Connect this
smartphone?”, and touch [YES] on the screen of
this unit.
≥ When the connection to this unit is complete, the image from
this unit is displayed on the smartphone screen.
Control this unit remotely with the smartphone.
2/2
 
A [Wi-Fi Setup]
B [EXIT]
Wi-Fi
Wi-Fi

C [Device Name]
D [YES]
E Message