33
(ENG) SQT1152
Preparations before using [Link to Cell]
Install the “Image App”. (l 32)
Setting up a direct connection between this unit and the smartphone when
[Direct Connection Password] is set to [OFF] (l 34)
≥ The default setting for [Direct Connection Password] is [OFF].
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Set up a Wi-Fi connection between this unit and the wireless access point.
≥ For information on how to connect this unit and a wireless access point, refer to the Owner’s
Manual (PDF format).
Setting up a direct Wi-Fi connection between this unit and a
smartphone
Setting up a Wi-Fi connection via a wireless access point
Image App
Simplified-HC-WXF991&VX981_PP-SQT1152_eng.book 33 ページ ２０１６年１月７日 木曜日 午前１０時３０分
To Next Page
Loading...
