What to do if my Panasonic Camcorder is not detected by the PC via USB cable?
Try these steps: 1. Re-insert the SD card into the unit, then reconnect the supplied USB cable. 2. Select another USB terminal on the PC. 3. Check the operating environment. 4. Restart the PC and turn the unit on again before reconnecting the USB cable.
How to fix strange colours when recording with Panasonic Camcorder in a gymnasium?
In locations with multiple light sources, such as a gymnasium or hall, adjust the White Balance setting to (Indoor mode 2). If you still cannot record clearly, switch to (Manual adjustment mode).
What to do if my Panasonic Camcorder is turned off automatically?
If the unit turns off when you turn off the power to the TV using the TV remote control, the VIERA Link is at work. If you are not using the VIERA Link, set [VIERA Link] to [OFF].
What to do if Panasonic Camcorder displays “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
This message indicates the unit has automatically detected an error. Try restarting the unit by turning it off and then on again. If the message continues to appear after restarting, repair is needed. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the unit by yourself.
What to do if Panasonic HC-W585 Camcorder is not detected by other devices via USB cable?
When connecting to other devices using only the battery, reconnect using the AC adaptor.
Why does remaining battery indication of Panasonic Camcorder not displayed properly?
The remaining battery capacity indication is an approximation. If it is not displayed correctly, fully charge the battery, discharge it, and then charge it again.
What to do if my Panasonic HC-W585 Camcorder cannot be operated even when turned on?
Remove the battery or AC adaptor, wait about 1 minute, and then reconnect it. After waiting another minute, turn the unit on again. If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from.
What to do if Panasonic HC-W585 Camcorder images or sounds are not outputted to TV?
Select the appropriate channel on your TV that matches the input used for the connection, referring to your TV's operating instructions. Adjust the [TV ASPECT] setting to match the TV's aspect ratio. Note that audio during playback mode is not output from the unit when connected to a TV, and sound levels should be adjusted on the TV itself.
Why is my Panasonic HC-W585 Camcorder not recognised when inserted in another device?
Ensure that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card/SDXC Memory Card) you inserted. Refer to the operating instructions of the device for details.
General| Type | Camcorder |
|---|---|
| Sensor Type | MOS |
| Lens | LEICA DICOMAR |
| Optical Zoom | 50x |
| Touch Panel | Yes |
| Recording Media | SD/SDHC/SDXC Memory Card |
| Recording Format | AVCHD, MP4 |
| Focus | Auto/Manual |
| External Microphone Input | Yes |
| Wi-Fi | Yes |
| NFC | Yes |
| F Value | F1.8 - F4.2 |
| LCD Monitor | 3.0 inch, 460, 800 dots |
| Video Compression Format | MPEG-4 AVC/H.264 |
| Audio Recording Format | Dolby Digital (2ch) |
| Microphone | Stereo |
| Speaker | Built-in |
| Standard Illumination | 1400 lx |
| Minimum Illumination | 1 lux (Low Light Mode) |
| White Balance | Auto/Manual |
| Shutter Speed | 1/25 - 1/8000 (Video), 1/2 - 1/8000 (Photo) |
| Power Supply | Battery |
| HDMI Output | Yes |
| USB Port | Yes |
| Battery Type | Lithium-ion |
| Video Resolution | Full HD (1920 x 1080) |
| Sensor Size | 1/5.8-inch |
| Image Stabilizer | Hybrid O.I.S.+ |
To Next Page
