To Next PageTo Next PageHow to fix Panasonic HC-W850 Camcorder if battery runs down quickly?
If your Panasonic Camcorder won't turn on, doesn't stay on, or the battery drains quickly, try charging the battery to ensure it has sufficient charge. Keep in mind that battery life decreases in cold environments. If the issue persists after a full charge, the battery may be worn out and require replacement.
How to troubleshoot if I cannot operate my Panasonic HC-W850 from a smartphone using [Remote Ctrl]?
To operate your Panasonic Camcorder from a smartphone using [Remote Ctrl], install the smartphone app “Image App” on your smartphone.
What to do if the SD card is inserted in another device and it is not recognised?
If an SD card from your Panasonic Camcorder isn't recognized in another device, ensure that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card/SDXC Memory Card) that you inserted.
What to do if my Panasonic HC-W850 Camcorder cannot be operated though it is turned on?
If your Panasonic Camcorder cannot be operated even though it is turned on, or it does not operate normally, remove the battery or AC adapter, wait about 1 minute, and then reconnect it. Wait another minute, then turn the unit on again. If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from.
Why does my Panasonic Camcorder arbitrarily stop recording?
If your Panasonic Camcorder arbitrarily stops recording, ensure you are using an SD card suitable for motion picture recording. The recordable time may have shortened due to the deterioration of the data writing speed or repeated recording and deletion. Format the SD card using the unit. If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF].
What to do if my Panasonic Camcorder is not detected by other devices when connected by the USB cable?
If your Panasonic Camcorder is connected to other devices using only the battery, reconnect using the AC adapter.
How to use [DLNA Play] on my Panasonic HC-W850 Camcorder?
To use [DLNA Play] on your Panasonic Camcorder, make sure the television is compatible with DLNA, and refer to the television's instructions. Ensure that the wireless access point and the device are properly connected. If necessary, move closer to the wireless access point and reconnect. If a connection cannot be made between this device and a DLNA-compatible device, try to reconnect and ensure they connect properly.
Why images or sounds are not output even when my Panasonic HC-W850 Camcorder is connected to the TV by the HDMI mini cable?
If your Panasonic Camcorder is connected to the TV by the HDMI mini cable, but images or sounds are not output, check if the HDMI mini cable is connected correctly, and ensure it is fully inserted.
Why images or sounds are not output even when my Panasonic Camcorder is correctly connected to a TV?
If your Panasonic Camcorder is connected to a TV but images or sounds are not output, or the images are squeezed horizontally, ensure you have selected the correct channel on your TV that matches the input used for the connection, referring to your TV's operating instructions. Also, change the [TV ASPECT] setting on the camcorder to match the aspect ratio of the TV. Note that during playback mode, audio is output from the TV, not the camcorder, so adjust the sound on the TV.
Why my Panasonic HC-W850 cannot be turned on or the battery runs down quickly?
If your Panasonic Camcorder cannot be turned on, does not stay on long enough, or the battery runs down quickly, try the following: Charge the battery again to ensure it is sufficiently charged. In cold places, the battery usage time becomes shorter. The battery has a limited life. If the operating time is still too short even after fully charging the battery, it likely needs to be replaced.
General