Panasonic HDC-SD1 - Setup; Operations during recording; Operations during playback

33
VQT1D38
Setup
¬ Rotate the mode dial to select .
1 Press the centre of the cursor
button, and icons will be
displayed on the screen.
≥The indication disappears when the centre
of the cursor button is pressed again.
≥The indication changes each time the
cursor button is moved down.
2 Move the cursor button up, left or
right to select an item.
¬ Rotate the mode dial to select .
1 Move the cursor button up,
down, left or right to select the
scene to be played back and
press the cursor button.
≥The selected scene is played back on the
full screen.
≥The operation icon is automatically
displayed on the screen.
2 Move the cursor button up,
down, left or right to operate.
≥The operation icon appears or disappears
each time the centre of the cursor button is
pressed.
Operations during recording Operations during playback
VQT1D38_EG_ENG.book 33 ページ ２００７年１月２７日 土曜日 午後３時１７分