101
VQT1T90
4
Select the desired number of prints,
then press the cursor button.
You can set up to 9 prints.
To cancel the setting, set the number of prints to [0].
Up to 8 files can be set in succession by
repeating steps 3 and 4.
5 Press the MENU button to
display the PictBridge menus.
6 Select the date print setting on
[DATE PRINT].
If the printer is not capable of date printing, this
setting is unavailable.
7 Select the paper size setting on
[PAPER SIZE].
[STANDARD]: Size specific to the printer
[4$5 INCH]: L size
[5$7 INCH]: 2L size
[4$6 INCH]: Postcard size
[A4]: A4 size
You cannot set paper sizes not supported on
the printer.
8 Select the desired layout setting
on [PAGE LAYOUT].
[STANDARD]: Layout specific to the printer
[ ]: No frame print
[ ]: Frame print
You cannot set page layouts not supported on
the printer.
9 Select [PRINT] [YES] and
press the cursor button to print
the pictures.
Exit PictBridge by disconnecting the USB cable
(supplied) after the pictures have been printed.
MENU
To Next Page
Loading...
