Panasonic HDC-SD100 - SD Card Management; Formatting; SD Card Information Display

83
VQT1T90
Editing
5
SD card management
Please be aware that if an SD card is formatted, then all the data recorded on the SD card will be
erased. Back up important data on a PC, DVD disc etc.
Select the menu. ( 22)
When the confirmation message appears,
select [YES], then press the cursor button.
When formatting is complete, press the MENU
button to exit the message screen.
Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to vibrations
or shock.
Used capacity and remaining capacity of the SD card can be confirmed.
!Rotate the mode dial to select .
Select the menu. ( 22)
Press the MENU button to close the indication.
Formatting
[SETUP] [FORMAT CARD] [YES]
Use this unit to format SD cards.
Do not format an SD card using any other equipment such as a PC. The card may not be used
on this unit.
SD card information display
[SETUP] [CARD STATUS] [YES]