23
VQT1T90
You can select the language on the screen display and the menu screen.
1 Press the MENU button, then select [LANGUAGE] and press the cursor
button.
2 Select [English] and press the cursor button.
Recording mode
*1 It is not displayed when the AUTO/MANUAL switch is set to AUTO.
*2 It is not displayed when the intelligent auto mode is set to [ON].
Part of the menu will not be used depending on the used functions. ( 121)
" [BASIC]
[SCENE MODE]
*1
( 58)
[D.ZOOM] ( 43)
[GUIDE LINES]
*2
( 52)
[SET WORLD TIME] ( 28)
" [RECORD SETUP]
[FACE FRAMING] ( 49)
[REC MODE] ( 38)
[DIGITAL CINEMA]
*2
( 52)
[FADE COLOUR] ( 47)
[WIND CUT]
*1
( 59)
[MIC SETUP] ( 53)
[MIC LEVEL]
*1
( 60)
[AGS] ( 33)
[HI-SPEED BURST]
*2
( 54)
[FLASH] ( 55)
[FLASH LEVEL] ( 55)
[RED EYE] ( 55)
[SHTR SOUND] ( 55)
" [ADVANCED]
[REC LAMP]
[AUTO SLOW SHTR]
*2
( 55)
[SHOOTING GUIDE] ( 39)
[Digital Cinema Colour] ( 56)
[PICTURE ADJUST]
*1
( 61)
[MF ASSIST]
*1
( 65)
[ZEBRA]
*1
( 61)
[LUMINANCE]
*1
( 62)
[HISTOGRAM]
*1
( 63)
Language selection
Menu list
The recording lamp lights up during recording
and flashes when the unit receives a signal
from the remote control or when the self-timer
is counting down. When this is set to [OFF], it
does not light during recording.
To Next Page
Loading...
