125
VQT1T90
Some playback images
are skipped
automatically.
Scene does not playback
to the end.
" The play mode is set to (Intelligent scene selection).
Change the play mode to (All scenes). ( 73)
Although this unit is
correctly connected to a
TV, images cannot be
seen.
The images are squeezed
horizontally.
" Please read the operating instructions of your TV and
select the channel that matches the input used for the
connection.
" Change the [TV ASPECT] setting to match the aspect ratio
of the TV.
" If both HDMI mini cable and component cable are
connected, set the unit to playback mode.
" Change the setting of the unit depending on the cable
connecting to the TV. ( 87)
Scenes cannot be
deleted.
" Protected scenes cannot be deleted. Release the protect
setting. ( 81)
" Any scenes/still pictures where the thumbnails are
displayed as cannot be deleted. If the scenes/still
pictures are unnecessary, format the SD card to erase the
data. ( 83) Please be aware that if an SD card is
formatted then all the data recorded on the SD card is
erased and cannot be recovered. Back up important data
on a PC, disc etc.
" If the SD card’s write protect switch is set to LOCK, then
deletion is disabled. ( 19)
The images on the SD
card do not look normal.
" The data may be destroyed. It may have been destroyed by
static or electromagnetic waves. Back up important data on
a PC, disc etc. as well.
If the SD card is inserted
in this unit, it is not
recognised.
" If the SD card is formatted on a PC, it may not be
recognised by this unit. Use this unit to format SD cards.
( 83)
If the SD card is inserted
in another device, it is not
recognised.
" Check that the device is compatible with the capacity or
type of SD card (SD Memory Card/SDHC Memory Card)
that you inserted. Refer to the operating instructions of the
device for details.
Problem Check points
To Next Page
Loading...
