67
VQT1T90
# To set the white balance
manually
1 Select [ ], fill the screen with a white
subject.
2 Press the camera function button for
about 1 second.
When the screen turns black instantly and the
[ ] display stops flashing and then lights
constantly, the setting is complete.
If the [ ] display continues flashing, the
white balance cannot be set because it is too
dark etc. In this case, use the automatic white
balance.
When the [ ] display flashes, the manual
white balance previously adjusted is stored.
Whenever recording conditions change, re-set
the white balance for correct adjustment.
When setting both the white balance and the
iris/gain, set the white balance first.
To Next Page
Loading...
