99
VQT3J56
Connecting with a HDMI mini cable
Select the desired method of HDMI output.
≥ [AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Please
read the operating instructions for the TV.)
≥ Image will not display on TV for a few seconds in the following cases.
jWhen the 1080/60p recording mode is turned on/off during Motion Picture Recording
Mode
jWhen you touch the play mode select icon to select [1080/60p], and then touch [ENTER]
during Playback Mode.
Connecting with the AV multi cable
AV multi connector output setting can be changed.
Changing the component output setting
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p]
: [SETUP] # [AV MULTI] # desired setting
[COMPONENT]: When connecting to the component terminal
[AV OUT]: When connecting to the video terminal
: [SETUP] # [COMPONENT OUT] # desired setting
[480i]: When connecting to the component terminal on the TV compatible with 480i.
(Playback is in standard quality.)
[1080i]: When connecting to the component terminal on the TV compatible with
1080i. (Playback is in high definition quality.)
MENU
HDC-SD90&TM90-P-VQT3J56_mst.book 99 ページ ２０１１年１月１３日 木曜日 午前９時１８分
To Next Page
Loading...
