Panasonic HL-BD82S - Broil Tips and Techniques; Broil Chart; Food Safety Temperature Guidelines

HL-BD82S
22
7 Disassembly and Assembly Instructions
7.1. Oven removal
1. Disconnect the power supply cord
2. Remove the screws shown in the pictures.
3. Pull off the oven.
4. Remove the oven by using the lateral handles.
Lateral Handles
7.2. Upper and Single cooling fan
motor replacement
1. Disconnect the power supply cord and remove the Oven
from the cabinet
2. Remove the two upper covers.
3. Remove the five screws A (two lateral & three on the top).
4. Disconnect the terminals on the fan and remove the fan
damaged.
5. Replace the cooling fan motor, paying attention to the
brackets B on the back support.
6. Connect the terminals and fix the motor by its screws.
7. The connections must not be loose.
8. Reinstall the Oven into the cabinet.
9. Reconnect the power supply cord after the Oven is
installed.
10. Run the Oven and check all functions.