VQT3P01 41
This unit can record motion pictures/still pictures under water to a depth 3 m.
.
1 Press and hold the screen lock button
until the message appears.
≥ You cannot perform touch operations.
≥ While setting [MENU] or [MODE], it
cannot be set to the screen lock mode.
≥ To release the screen lock mode, press and
hold the screen lock button again.
2 Press the Recording button.
∫ To switch between Motion Picture Recording Mode
and Still Picture Recording Mode
Press the screen lock button.
≥ When you use the screen lock mode, you have the following
limitations.
jThe effect function will be released.
jThe zoom magnification will be k1.
≥ To use the LED light, turn on the LED light setting, and then set to
screen lock mode. (l 39)
For underwater recording [HM-TA20]
HMTA20&TA2EB&EP&GC&GN-VQT3P01_mst.book 41 ページ ２０１１年４月２２日 金曜日 午後１時２５分
To Next Page
Loading...
