VQT3P01 57
You can check the start and stop of recording, or turning the unit on/off with an
audio tone.
Select the desired method of HDMI output.
≥ When [HDMI OUTPUT] is set to [50Hz], [576p] is displayed. When
[HDMI OUTPUT] is set to [60Hz], [480p] is displayed.
≥ [AUTO] determines the output resolution automatically based on
information from the recorded scene.
If the images are not output on the TV when the setting is [AUTO],
switch to the method [1080i] or [576p]/[480p] which enables the
images to be displayed on your TV. (Please read the operating
instructions for the TV.)
Output settings can be changed to match the environment in use when playing
back connected to a TV.
[ALERT SOUND]
[MENU] # # [ALERT SOUND] # [ON]
[HDMI resolution]
[MENU] # # [HDMI resolution] # desired setting
[AUTO]/[1080i]/[576p]/[480p]
[HDMI OUTPUT]
[MENU] # # [HDMI OUTPUT] # desired setting
[50Hz]/[60Hz]
HMTA20&TA2EB&EP&GC&GN-VQT3P01_mst.book 57 ページ ２０１１年４月２２日 金曜日 午後１時２５分
To Next Page
Loading...
