VQT3P01 81
If the SD card is
inserted in another
device, it is not
recognised.
≥ Check that the device is compatible
with the capacity or type of SD card
(SD Memory Card/SDHC Memory
Card/SDXC Memory Card) that you
inserted. Refer to the operating
instructions of the device for details.
Colour or brightness
of the image
changes, or you may
see horizontal bars
in the image.
The LCD monitor
flickers indoors.
≥ Colour or brightness of the image
may change, or you may see
horizontal bars in the image when the
object is recorded under fluorescent
light, mercury light or sodium light,
etc., but this is not a malfunction.
“Error occurred.
Please turn unit off,
then turn on again.”
is displayed.
≥ The unit has automatically detected
an error. Restart the unit by turning off
and on.
≥ Press the RESET button with the
stylus pen. (l 82)
≥ Repair is needed if it is repeatedly
displayed even if it is restarted.
Consult the dealer who you
purchased this unit from. Do not
attempt to repair the unit by yourself.
Problem Check points
HMTA20&TA2EB&EP&GC&GN-VQT3P01_mst.book 81 ページ ２０１１年４月２２日 金曜日 午後１時２５分
To Next Page
Loading...
