VQT3P01 89
Disassemble after the battery runs out.
≥ Using a driver (optional), disassemble in the following sequence.
≥ If it cannot be removed smoothly, contact Panasonic’s Service Center.
≥ Keep disassembled parts out of reach of children.
1 Remove all screws shown in the figure.
( : 9 screws, : 7 screws)
≥ Use a Phillips screwdriver (optional) to remove screws.
How to remove the battery
This figure describes the disposal of the unit, it is not instruction
for repair. If disassembled, repair is not possible.
HM-TA20
HM-TA2
HMTA20&TA2EB&EP&GC&GN-VQT3P01_mst.book 89 ページ ２０１１年４月２２日 金曜日 午後１時２５分
To Next Page
Loading...
