Tap [Rapid Playback] to start rapid playback. The following controls are displayed.
Starts or resumes playback
Pauses playback
Goes to normal playback
Erasing recordings
Erasing individual images
1 From the [HomeHawk] app home screen, tap ® [Recording List].
R The recording list screen is displayed ( “Viewing the recording list screen”, Page 98).
2 Select the desired camera.
3 Tap , , or the displayed date to select a recording date.
4 Select the desired recording.
5 Tap ® [OK].
Erasing multiple images
1 From the [HomeHawk] app home screen, tap ® [Recording List].
R The recording list screen is displayed ( “Viewing the recording list screen”, Page 98).
2 Select the desired camera.
3 Tap
, , or the displayed date to select a recording date.
4 Tap [Select].
5 Select the desired recordings.
R Tap
/ displayed next to the date to select or deselect all images shown in the list.
R Filter categories ( “Filters”, Page 100) can be used to display to the desired recordings.
6 When finished, tap [Delete] ® [OK].
Protecting recordings
You can protect recordings so that they cannot be erased.
Note:
R Protected images will be erased if the SD card is formatted ( “Formatting SD cards (window cameras
only)”, Page 111).
102
Using a shelf, floor, and window camera
To Next Page
Loading...
