Usage examples
Introduction
This section describes commonly used system features, the devices required for each example, and
briefly explains the required settings.
I want to view live camera images while I’m out
While away from home, you can view live camera images.
Supported devices
R Shelf camera (KX-HNC810, KX-HNC815)
R Floor camera (KX-HNC850, KX-HNC855)
R Window camera (KX-HNC500, KX-HNC505)
R Front door camera (KX-HNC700, KX-HNC705)
R Outdoor camera (KX-HNC710, KX-HNC715)
R HD Camera (KX-HNC800, KX-HNC805, KX-HN1003)
Required procedures
R Use the [HomeHawk] app to access the desired camera.
– Shelf cameras: See “Viewing the live camera image screen”, Page 50.
– Floor cameras: See “Viewing the live camera image screen”, Page 72.
– Window cameras: See “Viewing the live camera image screen”, Page 95
– Front door cameras and outdoor cameras: See “Viewing the live camera image screen”, Page 50.
– HD Camera: See “Viewing live HD camera images”, Page 153.
I want to know if someone approaches my home while I’m
out
While away from home, you can receive a notification on your mobile device if it was detected that
someone approaches your home.
Supported devices
R Front door camera (KX-HNC700, KX-HNC705)
R Outdoor camera (KX-HNC710, KX-HNC715)
R Window camera (KX-HNC500, KX-HNC505)
Required procedures
R Front door cameras and outdoor cameras:
– Use the [HomeHawk] app to configure a mode or use a preset mode. See “Mode settings
(overview)”, Page 132.
R Window cameras:
– Use the [HomeHawk] app to configure a mode, or use the [Protection] or [24/7 Recording]
modes. See “Window camera mode settings (overview)”, Page 106.
16
Getting started with the HomeHawk!
To Next Page
Loading...
