4 Select the desired recording.
5 Tap ® [OK].
Erasing multiple images
1 From the [HomeHawk] app home screen, tap
® [Recording List].
2 Select the desired access point and camera.
R Select [All Cameras] to see recorded images from all the cameras registered to the specified
access point.
3 Tap
, , or the displayed date to select a recording date.
4 Tap [Select].
5 Select the desired recordings.
R Tap
/ displayed next to the date to select or deselect all images shown in the list.
6 When finished, tap [Delete] ® [OK].
Protecting recordings
You can protect recordings so that they cannot be erased.
Protecting individual images
1 From the [HomeHawk] app home screen, tap ® [Recording List].
2 Select the desired access point and camera.
R Select [All Cameras] to see recorded images from all the cameras registered to the specified
access point.
3 Tap , , or the displayed date to select a recording date.
4 Select the desired recording.
5 Tap .
R Tap
to remove the protection.
R is displayed in the thumbnail of images to indicate that the image is protected.
Protecting multiple images
1 From the [HomeHawk] app home screen, tap
® [Recording List].
2 Select the desired access point and camera.
R Select [All Cameras] to see recorded images from all the cameras registered to the specified
access point.
3 Tap
, , or the displayed date to select a recording date.
131
Using a front door camera and outdoor camera
To Next Page
Loading...
