1 From the [HomeHawk] app home screen, tap ® [Settings].
2 Tap [Camera Settings] and select the desired camera.
3 Tap [System] ® [Bit Rate].
4 Select the desired setting and then tap [OK].
Note:
R This setting is only available when Amazon Echo Show ( “Amazon Alexa features (overview)”,
Page 35) or Google Home ( “Google Home features (overview)”, Page 38) settings are enabled.
Time adjustment
You can manually or automatically adjust the time of your devices to match the mobile device.
1 From the [HomeHawk] app home screen, tap ® [Settings].
2 Tap [Camera Settings] and select the desired camera.
3 Tap [System] ® [Time Adjustment].
4 To manually adjust the time:
Tap [Update Time].
To automatically adjust the time:
Tap the name of the displayed mobile device, select the mobile device to match the time with, and
then tap [OK].
Displaying device information
You can display device information, such as firmware versions and MAC addresses, and select whether
or not to upload logs.
1 From the [HomeHawk] app home screen, tap ® [Settings].
2 Tap [Camera Settings] and select the desired camera.
3 Tap [System] ® [System Info].
– [Camera Log Upload]: Determines whether or not logs are uploaded.
Notification settings
You can select which types of status notifications are displayed, and which are not.
Important:
R In order to receive notifications, your mobile device must be connected to the Internet. If your mobile
device is not connected to a wireless network, a mobile network connection is required.
1 From the [HomeHawk] app home screen, tap
® [Settings].
2 Tap [Camera Settings] and select the desired camera.
3 Tap [Notification Settings].
4 Select the desired settings.
R All cameras:
115
Using a shelf, floor, and window camera
To Next Page
Loading...
