1 Tap the setting value displayed next to [Play Sound].
2 Select the desired sound.
– [Beep]: Sounds a beep when motion is detected.
– [Announcement]: Plays a predetermined announcement when motion is detected.
R This setting is only available for front door cameras.
R This setting may not be available in some regions.
R The available languages of announcements may differ depending on the region of use.
– [OFF]: Disables sounds for motion detection.
3 When finished, tap [OK].
Note:
R You can change the volume of beeps and announcements played form cameras. See “Speaker
volume settings”, Page 136 for more information.
Editing modes
1 Access the mode screen ( “Accessing the mode screen”, Page 133).
2 Tap [Edit], and then tap next to the desired mode.
3 Edit the desired settings.
4 When finished, tap [Done].
Deleting modes
1 Access the mode screen ( “Accessing the mode screen”, Page 133).
2 Tap [Edit], and then tap
next to the desired mode.
3 Tap .
4 Tap [OK].
Status
Camera battery level
Battery icons displayed on camera images show the battery level or charging status of the battery.
R Battery level icons:
high
medium
low
needs charging
135
Using a front door camera and outdoor camera
To Next Page
Loading...
