The recording list displays all recordings for the specified dates and filters can be used to specify the
recordings that you want to display.
A
: Displays recorded images for the
previous date
: Displays recorded images for the next
date
B Displays the selected date and you can tap
here to select a date
C [Select]: Used to select multiple recordings
for deleting or protecting
D Shows the camera’s name
E Selects the camera when there are multiple
cameras registered
F Filters the displayed recorded images
according to the selected category
( “Filters”, Page 100)
G Goes to rapid playback
( “Rapid playback”, Page 101)
H Displays a thumbnail image for the recording
I Shows information about the type of recording
– [Person]: Recordings that contain
detections for the motion of people.
– [Motion]: Recordings that were recorded
when a motion sensor was triggered.
– [Manual]: Recordings that were recorded
manually.
J Shows the time when the recording was
made and its duration
K Indicates that a recording is protected L Displays the recorded images in a list
99
Using a shelf, floor, and window camera
To Next Page
Loading...
