18
SQT0251 (ENG)
Press the power button to turn on this unit.
The clock is not set at the time of purchase. Make sure to set the clock.
1 Press the joystick to select the menu. (l 19)
2 Move the joystick right or left to select the date to be set, then move the
joystick up or down to select the desired value.
≥ Press the joystick or recording start/stop button to enter the selection.
≥ The year can be set between 2000 and 2039.
3 Move the joystick right or left to select the time to be set, then move the
joystick up or down to select the desired value.
≥ Press the joystick to enter the selection.
4 Press the recording start/stop button to complete the setting.
≥ When the unit is turned on for the first time, a message asking you to set the date and time will
appear. Select [YES] and perform Steps 2 to 3 to set the date and time.
Preparation
Turning this unit on/off
The power lamp is turned on.
To turn off this unit
Hold down the power button until the power
lamp goes off.
Preparation
Setting date and time
[SETUP] # [CLOCK SET]
HX-A500-SQT0251_mst.book 18 ページ ２０１４年４月１４日 月曜日 午後６時１５分
To Next Page
Loading...
