27
(ENG) SQT0251
Using remote operation with a direct connection
([Smartphone Direct Connect])
∫ Preparations before using remote operation
1 Install the smartphone application “Image App” on your smartphone. (l 26)
2 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-
compatible), or iOS device.
≥ If your smartphone is NFC-compatible, a message asking you to touch the NFC mark on the
device will be displayed when starting up the “Image App”.
∫ If the device is Android (NFC-compatible)
≥ Set the NFC function of the smartphone to on.
1 Start up the smartphone application “Image App”.
2 Touch the smartphone on of this unit.
≥ Touch the NFC mark while a message asking you to touch the NFC
mark on the device is displayed on the smartphone screen.
≥ If this is the first time the smartphone is connecting to this unit, the
message is displayed on the screen of this unit. Select [YES], press
the joystick, and then touch the smartphone on of this unit again.
≥ If the unit is not recognized even when touching the smartphone,
change positions and try again.
≥ You cannot set up a connection when recording an image with this unit or the menu screen is
displayed.
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
∫ If the device is Android (non-NFC-compatible) or iOS
≥ This operation is not possible while this unit is recording.
1 Press the joystick to select the menu.
2 Select the [Smartphone Direct Connect], press the joystick, then start up the
[Smartphone Direct Connect].
≥ A Wi-Fi mode icon ( ) will be displayed on the screen.
3 On the smartphone, select the SSID displayed on this unit from the Wi-Fi
setup menu.
4 Enter the Password displayed on this unit’s screen on the smartphone.
5 Start up the smartphone application “Image App”.
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
[Wi-Fi SETUP] # [Wi-Fi MODE]
Confirming that the Wi-Fi connection is complete
j is displayed on the screen
HX-A500-SQT0251_mst.book 27 ページ ２０１４年４月１４日 月曜日 午後６時１５分
To Next Page
Loading...
