20
SQT0251 (ENG)
This unit is designed to record images when attached to the Armband Case and the Head Mount.
Wearing this unit
Wear the main unit and camera unit.
1 Insert the main unit so that you can see the
buttons on it
≥ Make sure to insert the main unit all the way in.
2 Fasten the main unit with the hook and
loop fastener.
3 Adjust the length of the band.
Basic
Before recording
≥ If a feeling of discomfort arises after a long
period of use, stop the use or adjust the
size of the Head Mount/Armband Case/
Headband to loosen them a little. Please
note that the parts may leave marks on
your face and other body parts after use.
≥ For the direction of the camera, check the
actual image on the LCD monitor.
A Camera unit
B Main unit
Fastening the main unit using the Armband Case
B Hard surface of the hook and loop
fastener
C Hook and loop fastener
HX-A500-SQT0251_mst.book 20 ページ 2014年4月14日 月曜日 午後6時15分