VQT3M88 117
OPTION SETTINGS
i If Card B already has files in it when it replaces Card A, file names are
assigned as follows.
When the highest file number on Card B (before replacing) is lower
than the highest file number on Card A: the file name of the next
recorded image continues from last file name recorded on Card A.
When the highest file number on Card B (before replacing) is higher
than the highest file number on Card A: the file name of the next
recorded image continues from last file name recorded on Card B.
HINT
When the built-in memory is used...
i If the file number continued function is [ON], file name numbering
continues just the same as when an SD card is used, even if the built-in
memory is formatted or the medium is switched to the SD card.
At the end of a photography session...
i Until the file number continued function is set to [OFF], consecutive file
names are assigned.
Card A 0001, 0002 ..... 0012, 0013
Card B 0001, 0002, 0014, 0015 ..... 0025, 0026
Previously recorded files
Replace card
Card A 0001, 0002 ..... 0012, 0013
Card B 0020, 0021, 0022, 0023 ..... 0025, 0026
Previously recorded files
Replace card
To Next Page
Loading...
