VQT3M88 85
ADVANCED OPERATION/SHOOTING
Exposure compensation
By assigning the exposure compensation operation shortcut to the SET button
(page 82), you can make the image lighter or darker when capturing images.
1 Assign the operation shortcut to
the SET button (page 82).
2 Press the SET button to which
the operation shortcut was
assigned.
h
The exposure compensation bar
appears.
3 Toggle the SET button to the left
or right to adjust the exposure.
h
The exposure compensation
numerical value is shown at the
left end of the exposure
compensation bar.
h
The exposure compensation
can be set to a value from
–1.8 to +1.8.
h
The exposure compensation bar
is canceled when the MENU
button or the SET button is
pressed.
HINT
The exposure compensation setting is canceled in the following cases:
i
When the pointer is set to ±0.0.
i
When the camera is set to the playback mode.
i
After the power is turned off.
i
When the camera is set to the standby mode.
i
When the scene mode is changed.
i
When the USB cable is inserted or removed.
i
Intelligent Auto mode is activated or deactivated (HX-DC10).
340 000:15:17
16
M
-
S
1080-30
p
0.0
Exposure compensation bar
Pointer
To Next Page
Loading...
