30 VQT3M88
SETUP
INSTALLING THE CARD
Before using a newly purchased card or one that was used in another device,
be sure to format it with this camera (page 107 and 118). If an unformatted
card is used, the card itself may become unusable.
<When removing the card...>
h To remove the card, press it in, and then release. The card will
protrude slightly, and you can then pull it out.
Card’s label side
2 Insert the card
1 Open
3 Close
i Push straight in
until you hear a
click.
4 Close firmly
until you hear
a click.
1 Push the middle part of the card.
2 Pull the card
out straight.
To Next Page
Loading...
