VQT3P12 103
OPTION SETTINGS
TV output setting (page 100)
Specify the type of image signal that is output from your camera’s USB/AV
terminal.
1 Select [TV OUTPUT], and press
the SET button.
TV SYSTEM:
Set the type of TV signal that is
output from the USB/AV terminal.
TV ASPECT:
Set the TV’s aspect ratio.
HDMI:
Set the signal that is output from
the HDMI terminal.
VIERA Link:
Set the VIERA Link function.
2 Select the desired setting, and press the SET button.
h The screen to change the parameter for the selected setting appears.
<If [TV SYSTEM] is selected>
NTSC: Outputs NTSC video signals.
PAL: Outputs PAL video signals.
<If [TV ASPECT] is selected>
16:9: Use this setting when a TV having an aspect ratio of 16:9 is
connected.
4:3: Use this setting when a TV having an aspect ratio of 4:3 is
connected.
<If [HDMI] is selected>
AUTO: The camera automatically determines the appropriate setting.
720p: Choose this setting if the video was recorded in the or
mode.
1080i: Choose this setting if the video was recorded in the or
mode.
480p: Choose this setting if the video was recorded in the
mode.
h Does not work with 480i connector.
SET
NTSC
16:9
TV OUTPUT
TV SYSTEM
TV ASPECT
HDMI
VIERA Link
ENTER
AUTO
ON
To Next Page
Loading...
